RESTORED! Tippmann 98 Custom ACT Anti Chop Paintball Marker Gun

Description

Tippmann 98 Custom ACT Anti Chop Paintball Marker Gun. This is the Anti Chop verison of the 98 Custom. The bolt has a spring on the rod that connects the bolt to the hammer. If a ball get half loaded before you pull the trigger the bolt wont go forward and it wont chop. You can stick your finger in the chamber and pull the trigger and it wont even hurt. The bolt resets as soon as the hammer goes back again. You have to keep the internals clean for this to work consistently so make sure you clean it frequently. It comes with a solid wood grip in the front and nice wood grip panels. They are clear coated. Its not like the cheap plastic front grip it comes with. I think it looks way better this way.
The marker was stripped, cleaned, orings replaced, tested and the FPS set to 280. If you going to use compressed air with this marker make sure your tank output pressure is at least 800psi, otherwise you will struggle with high air consumption or low FPS. I have a few tanks that say 800psi but are outputting 700psi or 650. If you have any question now or in the future please feel free to ask, Im happy to help. Thank you