-40%

Rogue Monster Lite Slinger With Plate Load Kit

$ 10.82

Availability: 99 in stock
  • Usage: Home Use
  • Type: Home Gym
  • Sport/Activity: Gym & Training
  • All returns accepted: ReturnsNotAccepted
  • Brand: Rogue Fitness
  • Stations: Lat Pull Down
  • Condition: New

    Description

    ROGUE MONSTER LITE SLINGER™ WITH PLATE LOAD KIT
    The Rogue Monster Lite Slinger™ is a rack-mounted cable-pulley system designed to deliver the same training benefits of a traditional Lat Pulldown Machine with better space and cost efficiency. This particular model is compatible exclusively with our
    Monster LITE Power Racks
    and it’s now available in your choice of three different resistance formats: plate-loaded, band-loaded, or weight stack.*Customers may also choose to purchase Monster Lite 3.0 24” or 43” Crossmembers, which include pre-drilled holes for the cable to pass through. Monster Lite 3.0 crossmembers are required for use with the Weight Stack Slinger and are highly recommended for users who do not want to drill holes in their existing Monster Lite 1.0 or 2.0 crossmembers.*
    Note:
    The Monster Lite Slinger with the Weight Stack resistance type is only compatible with Monster Lite 3.0 Crossmembers. Both the Top and Bottom Crossmembers must be Monster Lite 3.0 to install the Monster Lite Slinger with Weight Stack.
    *The Monster Lite Slinger comes with adjustable components for set-up on a 90” or 108” unit. However, the Weight Stack resistance option may NOT be compatible with rack heights above 90”.
    Warning:
    Any Rack or Rig utilizing the Slinger attachment must be securely fastened to the floor for use.
    The Monster Lite Slinger Base Unit includes:
    (2) Slinger Mounting Plates
    (2) 6" Cable Pulleys
    (1) 1/4" MIL Spec Cable with Rogue made hardware
    (1) Slinger Extension Strap - for 108” units, NOT applicable to Weight Stack version
    (1) Slinger Band Sheath - 1000D Cordura
    (2) Carabiners
    (2) Black Zinc 5/8” Bolt Assemblies
    (2) Rubber Grommets for protecting the cable
    Plate Load Kit
    Available as an optional add-on for a new Slinger or a la carte to convert an existing Slinger from band resistance to plate resistance. Works with standard bumpers or steel plates. Package includes:
    Loading Pin:
    1.9" diameter, 11.5" loadable space. Weight unloaded = 7.5lbs. Texture Black Powdercoat finish.
    Plate Load Base:
    Supports the loading pin when adding plates and connects to customers upright via a 5/8” detent pin. Made from 3/16" laser-cut and formed steel. Texture Black Powdercoat finish.
    Stroops Lightweight Sheathed Resistance Band:
    Prevents the loading pin from swaying around while in use. It gets clipped into the bottom of the loading pin from the shackle that is connected to the bottom crossmember. Color: Black
    Specially Designed Slinger Shackle:
    Replaces the Monster Lite Shackle of the base unit (if ordering a new Slinger with the Plate Load option, the standard ML Shackle from the base unit package will NOT be included).
    Additional Specifications
    Patented Design
    Pull Ratio: 1:1
    Rack-Mounted Cable Pulley / Lat Pulldown System
    Compatible ONLY with Rogue Monster Lite Racks
    Front of the Slinger will extend approximately 7" out from the face of the upright it is mounted above, and approximately 7" above the top of that same upright.
    User Assembly Required
    Important:
    Any Rack or Rig utilizing the Slinger attachment must be securely fastened to the floor for use.
    Orders are packaged and shipped from Rogue HQ in Columbus, OH. You can follow its progress from our factory floor to your door using the
    Rogue Shipping Tracker
    .
    *The Monster Light Shackle is excluded when customers opt for a plate-loaded resistance option. On band-loaded Slingers, it serves as a sturdy mounting point to the lower crossmember within the user’s rack. The Shackle is made from a ¼” thick laser-cut and bent steel plate.